Bricks Blocks Clear Coat Sealer & Cleaner 1 2 3 Kit Revive Path Paving System New Drive Alive Product – Revive your drive Complete Revive Kit with Clear Coat Sealer
Enhance coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface. A ready-to-use solution for use on concrete, block paving, paving slabs, walling and roof tiles.
- Restores your driveway colour
- It’s so easy to use.
- Step 1 remove those pesky oil stains
- Step 2 clean away the moss, algae & dirt
- Step 3 Just stir and apply the Clear coat sealer using either a roller or brush
- Job Done!
Step 1 Oil Stain Remover • Simply pour, allow to dry and brush away. • VOC free formulation. • Bio-degradable.
Step 2 Organic Cleaner • Powerful cleaning agent. • The simple way to eradicate moss and algae safely. • Non toxic – safe for pets and wildlife. • No preparation – no scrubbing.
Step 3 Clear Coat Block Sealer to revitalise your drive. It’s so easy to use. Just stir and apply using either a roller or brush.
Now enjoy the results
Made by Bond-It – The UK manufactures of a large range of Professional Silicone Sealants & the full Drive Alive Range (see our shop)
1L Oil Stain Remover
2.5L Organic Cleaner
4 Litres of Clear Coat Sealer
FULL PRODUCT DESCRIPTION
Designed to clean and enhance and seal coloured concrete and block paving and protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance and seal present colour and extend the lifespan of the treated surface. A ready-to-use solution for use on concrete, block paving, paving slabs, walling and roof tiles.
- Restores colour
- Reduces water penetration, staining and dirt/grime build-up
- UV stable formulation
- Helps inhibit organic growth
- Solvent-free formulation – low odour
- Facilitates easier cleaning
- Improves water resistance and UV resistance
- Contains fungicide which retards mould growth.
Ready to use and does not require diluting. Stir well before use and periodically during application. A test on a small inconspicuous area is recommended to determine the depth of colour required. Always use tubs from the same batch to guarantee colour matching. Apply using a brush or lambswool roller and do not over apply or allow puddling to occur. This product will dry in 1 to 2 hours on a dry sunny day; however, cold or humid conditions will slow drying times. Do not traffic for approximately 3-4 hours after application.
Also available with pigment, ie a Colour Enhancer for faded bricks/paving, & available for tarmac. see our shop or send a message.
Posted same working day.
Any questions just ask and we’ll do our best to help.
See our shop for a large range of Home & Garden products plus the full range of Drive Alive products including Step 1 & Step 2 or complete kits to Revive Your Drive.