Dark Oak Ready Mixed Wood Filler 250ml Painting Decorating Home DIY Trade Paint It Varnish It
Brand New Trade Quality Product
An easy to use, ready mixed, high quality, solvent-free filler, ideal for filling small imperfections (max 5mm depth) and covering the recesses left by nails and screws in wood. For general wood filling of window sills, frames, bannisters, MDF and laminates, etc.
- Can be stained, painted, varnished or dyed once cured.
- Solvent-free, low odour and non-flammable.
- Suitable for internal and external applications.
General wood filling of windowsills, frames, banisters, MDF and laminates, etc. Repairing wood damaged by wet rot in both internal and external locations. Repair damage and chips to parquet or laminate flooring, wooden furniture, etc.
Preparation Ensure the repair area is clean and dry and free from dust or any contamination that may affect adhesion. Wet down the surfaces that the material is to be applied to. NOTE: If you intend to over-stain the repair, choose the filler colour closest to the wood you are filling, not the stain you intend to use. Always check the stain on a small area as the filler may absorb the stain at a different rate to the wood. As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first.
Stir well before use. Apply with a wetted filling knife or spreader, forcing into cracks and holes. For deep holes, build up in layers allowing each layer to dry. Leave slightly proud and when completely dry, sand down. Drying time touch dry in 30 minutes. When over painting, staining or varnishing, you may get a colour difference with the surrounding wood, so always check on a small area first. Do not add stain to Bond It ALL PURPOSE WOOD FILLER, instead wait until the filler is dry and then stain over. Not suitable for filling gaps between floor boards.
As the filler may absorb some stains at different rates to the surrounding timber, always test a small area first.
Note: filler may dry darker. Do not exceed 5mm in one coat. For holes deeper than 5mm or for areas subject to
impacts such as doors and window frames, use Bond It 2 PART WOOD FILLER. Protect from rain when used externally for at least 5 hours. Do not apply below 5C.
All tools should be cleaned immediately after use with warm soapy water.
- Dark Oak 250ml