Application

Surfaces to be bonded must be clean, dry and free from dust, grease, oil or any other contaminants that may hinder adhesion. Apply a thin film to one side only and bring together immediately. Reposition within 2-3 seconds. Maintain light pressure without movement of the joint for at least 10 seconds, do not handle until bonding time stated above has expired. Clamp or hold for a few seconds.

Preparation

Surfaces to be bonded must be clean, dry and free from dust, grease, oil or any other contaminants that may hinder adhesion.

How To Use

• HVC16 permits readjustment of components before bonding commences.
• Apply a thin film to one side only and bring together immediately.
• Reposition within 2-3 seconds.
• Maintain light pressure without movement of the joint for at least 10 seconds, do not handle until bonding time stated above has expired.
• Clamp or hold for a few seconds.
• As the polymerisation of cyanoacrylates is initiated by moisture from the atmosphere best results will be
  obtained if the relative humidity is in excess of 50%.
• Higher levels of humidity reduce the opportunity for monomer evaporation thus limiting fume build-up.
• If bonding is continuous process good ventilation must be ensured.

Not suitable for permanent glass bonding. Oily or greasy surfaces cannot be bonded. Olefinic or Fluro polymers may require specialised bonding techniques.

Includes 

• 1x 50g bottle