Lead Flashing Edging Roofing Sealant Sealer Flash Mate Roofing Tile Slate Like Silicone
Brand New Professional Trade Quality Product
A high performance neutral cure silicone sealant specifically designed for use with roofing products both modern and traditional, internally and externally. Conforms to EN15651-1,2; F EXT-INT, G.
Bond It FLASH-MATE is a low modulus neutral cure fast-skinning, roof sealant. It is designed to stop weather ingression, tile lift and noise. FLASH-MATE is used to seal or bond dissimilar materials to prevent weather ingression.
FLASH-MATE can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing rooflights, conservatories, soffits, glass houses, industrial roofing systems, lead flashing and to prevent tile lifting and wind noise.
FLASH-MATE is compatible with lead, galvanised steel and all metals. FLASH-MATE has excellent UV, heat and ozone resistance and sets to tough resilient rubber. It is ideal for use on: glass; slate; all metals including lead and galvanised steel; concrete and brick; GRP; sealed timber; plastics (including polycarbonate); acrylics; PVCu and all painted surfaces.
Ensure all surfaces are clean, dry and free from grease or any contaminants that may hinder adhesion. Priming may be necessary on porous surfaces.
Apply using a standard sealant gun with the nozzle cut at an angle of 45°, and to an opening slightly larger than the joint to be sealed. Best tooling is achieved if a minute or two is allowed after application before smoothing. Polyethylene foam backing rod pushed into construction joints before sealing gives a technically superior joint and minimises sealant consumption.
For bonding press the two surfaces together before skinning commences. On very hot roofs skinning time will be much shorter.
Once the silicone has been applied and tooled rain will not have any adverse effects on the sealant.
Tools can be cleaned in WHITE SPIRIT or Bond It MULTI-WIPES or MONSTER WIPES prior to curing taking place.
Porous surfaces should be primed first. Do not use on surfaces where water can penetrate through porous materials to the bond interface without first carrying out remedial work.
Not suitable for use on natural stone.
FLASH-MATE is only available in grey