Free Super glue with all orders
£10 off when you spend £100 or more Enter: 10off
Free UK Shipping

Mechanics Studlock Locks Bolt Threads Prevents Corrosion A70 25ml Like Locktite

You Save 17%


185 sold

Dispatch Time: Same Working Day
View and buy this product Right Now, from the Bond It Shop eBay Store

8,000+ ⭐⭐⭐⭐⭐

Mechanics Studlock Locks Bolt Threads Prevents Corrosion A70 25ml Similar/Like Locktite

Brand New Premium Trade Quality Product

A premium Trade Quality Product, Bond It A70 STUDLOCK can be used for fixing and sealing of plugs, through bolts and studs into castings/casings, etc.

A high strength, anaerobic adhesive for the permanent retention and sealing of threaded fasteners, sleeves and bearings. It is resistant to fuels, oils, hydraulic and refrigeration fluids.

It eliminates the need for split pins, double nutting and spot welds and is vibration proof. A70 STUDLOCK also acts as a lubricant during assembly to ensure accurate torquing and protection against corrosion. Use of A70 STUDLOCK improves throughput and efficiency. Preparation Surfaces must be clean, dry and free from grease.


Coat threads and ensure the adhesive is present at locking position. The adhesive starts to cure on exclusion of air from the bonding system. Observe handling and strength times stated below. Bonding Time Assuming room temperature is 20o C. Initial strength approximately 10 minutes. Full working strength 6-12 hours. Ultimate cure 24 hours.


Oily or greasy surfaces should not be bonded with A70 STUDLOCK. It is designed for metal to metal bonding. Users should satisfy themselves as to the products efficiency when used in conjunction with engineering rubbers and plastics. The strength of the Studlock bond will be substantially lower on Stainless Steel. On certain grades it may not work at all without the use of an activator. It is the user’s responsibility to check suitability of this product with their particular application.

Note: See our shop for A43 THREADLOCK, use A43 for applications of pre oiled bolts/studs/threads or used slightly oily bolts/studs/threads.

Made by Bond It, a UK manufacturer of various silicone sealants, adhesives & products for the Professional Trade & DIY.

Ideal for all DIY & Professional Trade alike.

Posted same working day.

Any questions just ask and we’ll do our best to help.

See our shop for more great products.

Additional information

Weight 1 kg
Dimensions 60 × 60 × 140 cm

Bond It

Manufacturer Part Number





comments about site?

Shopping cart


No products in the cart.

Continue Shopping