Painting Decorating Stabilizing Solution 5L Bonding Priming Sealer Interior Exterior Home DIY
Brand New Trade Quality Product
A white, ready-to-use, water-based treatment for bonding and priming surfaces prior to painting and decorating. Suitable for interior and exterior use and can be applied to damp surfaces. Stabilises poor surfaces, seals and binds chalky or weathered areas, gives a sound base for decorating and is quick drying.
Ensure all surfaces are clean and free from any contaminants including loose and flaking material. Remove any mould or algae with MOULD & MILDEW WASH or MOSS-STOP! prior to application.
For use as a pre-treatment for surfaces which are old, weathered, chalky or porous. Suitable for use on most substrates including concrete, cement, plaster, plasterboard, renders, pebble dash and MDF, etc. Note: Not to be applied when the temperature is below 5°C or when rain or frost is imminent.
How To Use
- Do not dilute.
- Stir well and apply by brush, roller or airless spray.
- A second coat may be required on porous or powdery surfaces but allow 12 hours drying time between application of coats.
Do not apply STABILIZING SOLUTION when the temperature is below 5C or when rain or frost is imminent. However, this product can be applied to damp substrates.
- 6m2 per litre, depending on porosity of substrate.
- 5 Litres