Pine 2 Part Wood Filler 275ml Painting Decorating Home DIY Trade Stain It Paint It Varnish It
Brand New Trade Quality Product
A tough, durable, two-part wood filler based on polyester resin. Long-lasting repair for all wood types.
- Can be stained, painted, varnished or dyed once cured.
- Chemical curing system – sets hard in 30 minutes to any depth.
- Sandable in 30 minutes.
- High strength; can be drilled, nailed, planed and carved once dry.
- Good movement capabilities to flex with wood. No shrinking or cracking.
- Waterproof, suitable for internal and external application.
General wood filling of windowsills, frames, banisters, MDF and laminates, etc. Repairing wood damaged by wet rot in both internal and external locations. Repair damage and chips to parquet or laminate flooring, wooden furniture, etc.
Ensure the repair area is clean and dry and free from dust or any contamination that may affect adhesion. Any rotten wood should be totally removed. If you intend to over-stain the repair, choose the filler colour closest to the wood you are filling, not the stain you intend to use. Always check the stain on a small area as the filler may absorb the stain at a different rate to the wood.
Mix a golf ball volume of filler (approx. 38mm diameter and a 38mm strip of hardener into a homogeneous paste with the spatula provided. Press firmly into the surface to be repaired, leaving it slightly proud. Leave to dry for about 30 minutes until hard before finishing (sanding and or painting/staining).
Do not attempt to push the mixture back into pack once mixed. Avoid contact with eyes and skin. Always test a small inconspicuous area for colour matching purposes. Throw away any unused mixed material after 10 minutes.
- pine 275ml