Roof Repair Seal It Cracks & Edges Premium Sealer For Use With Seal It Liquid Membrane White
Brand New Professional Trade Quality Product
The Seal It One Coat System, allows you to install a Liquid Roofing Membrane with ease.
Seal It One Coat ‘Cracks & Edges’ White
A one part, high quality, flexible material for use with Seal It Liquid Membrane. Based on hybrid technology this product can be applied to wet surfaces and is non shrinking making it ideal for use as a gap filler where cracks and apertures exist in the roof substrate to be covered.
- High modulus, remains permanently flexible.
- For exterior applications in all weather conditions.
- Non shrinking
- Contains no isocyanates, solvents, silicone and phthalates
- Rapid curing
- Excellent adhesion to most surfaces (even moist surfaces)
- Wet on wet application
- No odour
- Part of the Seal It One Coat Liquid Membrane System by Bond It
It can be used prior to application of Seal It Liquid Membrane to make good any cracks, edges, details and other openings in the substrate to give a sound base. Suitable for use with most common roofing materials offering superb adhesion. Alternatively it can also be used after Seal It Liquid Membrane application to secure edgings and seals to create a self terminating flashing or provide extra protection around roof elements such as chimneys, air vents etc.
Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion.
Carefully cut the top of the cartridge taking care not to damage the threaded area. Screw on the nozzle supplied and cut at an angle approximately 45°. Apply using a standard sealant gun. Apply in a continuous bead along the area. Smooth by tooling with a soapy solution and once cured rinse with clean water before applying Seal It Liquid Membrane. Remove any excess material and clean tools immediately with white spirit.
Replace plastic cap after use. Seal It Liquid Membrane can be applied over the filled gaps and cracks approximately 8 hours after application of sealant/filler, or once the filler has skinned sufficiently so that it will not be damaged during application of the coating.
It is imperative that the sealer and Seal It Liquid Membrane are not applied over 5 days apart from each other. Adhesion between the two products will be affected if applied after 5 days. It is essential that bitumen surfaces and roof felts, etc. are properly and completely primed using Seal It Primer before application or product failure WILL occur. Do use with expansion joints or for installations where the joints are continually immersed in water. Note: not suitable for use on LSE plastics such as PE, PP and PTFE.
- Includes 295ml EU3 tube – White
Requires an application gun/tool, see our shop.
Works in harmony with the Seal It by Bond It, range of Liquid Membranes and complimenting Seal It products.
See our shop to complete the Roofing job with the Seal It One Coat, the system includes the Seal It One Coat Accelerator, Seal It Liquid Membrane and Seal It Reinforcement Mat and the Seal It Cracks & Edges (above) also available in Grey.