Tarmac Driveway Colour Restorer Tarmac Path Paving Revive Your Drive Today! New Drive Alive Product – Revive your drive Tarmac Colour Restorer
Enhance and Restore Tarmac and protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on all Tarmac
Restores your Tarmac driveway colour
It’s so easy to use. Just stir and apply using either a roller or brush.
Made by Bond-It – The UK manufactures of a large range of Silicone Sealants & the full Drive Alive Range (see our shop)
Includes: 4 Litres
Colour Restorer (Tarmac) Designed to enhance Tarmac and protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on All Tarmac Paths and Driveways.
- Restores tarmac colour
- Easy, single coat application
- Reduces water penetration, staining and dirt/grime build-up
- UV stable formulation
- Helps inhibit organic growth
- Solvent-free formulation – low odour
- Facilitates easier cleaning
A ready-to-use, black water based coating for tarmac drives and pathways. Designed to restore colour, reduce water penetration and protect from dirt and grime build up.
Restores colour and protects tarmac driveways and pathways against water penetration, reduces organic/algae growth and improves resistance to oil stains and dirt and grime build up.
For best results use Drive Alive Organic Cleaner prior to application. Refer to the appropriate data sheet for the correct application method.
Ensure the surface to be treated is free from oil, grease, dust and any other loose material that may hinder adhesion.
If surface has been treated with Organic Cleaner ensure that residue is thoroughly washed off and left to dry for 48 hours prior to application.
NB: It is recommended that a test be carried out on a small inconspicious area to ensure the required effect is achieved.
Tarmac Restorer is ready to use and does not require diluting.
Stir thoroughly before and occasionally during use.
Ensure the surface is completely dry prior to application.
Apply using a brush, roller or squeegee, ensuring that no pooling or ponding occurs. A single coat is normally sufficient, however, when masking cement or mortar stains, a further coat may be required.
Allow a minimum of 4 hours between coats.
Cold or humid conditions will slow drying times.
Do not apply to wet or damp surfaces or in conditions of high humidity. Surfaces should be allowed to dry completely for 48 hours prior to application.
Do not use if rain is imminent (protect from rain until dry). Tarmac Restorer is not recommended for use on permeable tarmac. Do not allow any run off to contaminate drains, waterways or plants.
Do not use in temperatures below +5oC and above +30oC.
Approximately 16-22m2 per 4 litres, depending on surface porosity.
- 4 Litres
Only to be used in conjunction with other Bond It Drive Alive products as follows.
For Oil & Grease Stains see our shop for Oil Stain Remover or see the steps below for a full driveway make over.
Step 1 Oil Stain Remover (see our shop) • Simply pour, allow to dry and brush away. • VOC free formulation. • Bio-degradable.
Step 2 Organic Cleaner (see our shop) • Powerful cleaning agent. • The simple way to eradicate moss and algae safely. • Non toxic – safe for pets and wildlife. • No preparation – no scrubbing.
Step 3 Choose either Colour Enhancer, Clear Coat Block Sealer or Tarmac Restorer (the item listed here) to revitalise your drive. It’s so easy to use. Just stir and apply using either a roller or brush. Now enjoy the results 🙂
Any questions just ask and we’ll do our best to help.
See our shop for a large range of Home & Garden products plus the full range of Drive Alive products including Step 1 & Step 2 or complete kits to Revive Your Drive.